Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rudd heat pump work OK in heat mode but not cooling mode
[ 1 Answers ]
Rudd heatpump that use r410 refrigerant pressure OK in heat mode but pressure low in cooling mode
Upstairs fan won't turn off after Heat Pump turns off. COOL Mode OK
[ 1 Answers ]
In heat mode after temp reached.HP and it's fan go off,but not house fan. COOL works OK. Have Robert shaw 4220. Removed "G" wire on stat block and fan still doesn't turn off.Thanks Dan...
Wireless wind chill and humidex therometer
[ 0 Answers ]
I received this unit at XMAS, 2nd time I've had prolems getting information to restart after battery change at transmitter. Scenario, I have changed batteries in both monitor and transmitter, after change in transmitter, led lit for a few seconds, but all that shows on monitor is 3 dash...
Heat pump runs in a/c mode but won't come on in heat mode
[ 2 Answers ]
I am selling my house and the home inspector noticed that when you turn the heat on, the heat pump doesn't come on and goes to auxiliary heat. It works fine for air conditioning and when I call for heat at the stat and push the contactor in manually it is blowing cold air out of the condensing...
Wind chill factor
[ 2 Answers ]
I'm curious about the effect, if any, of the wind chill factor. Suppose the outside temperature is 33-34 degrees and there is a brisk breeze blowing that causes the wind chill factor to be 27 degrees. Does that mean that a container of water would freeze if exposed to this wind chill temeperature? ... View more questions Search
|