 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane XR80 not starting
Hello, My Trane XR80 doesn't turn on. The red light has a slow steady blink, about 1 every second which I believe means that it is not calling for heat. If I open the door and hold down the button, I hear a click but the burner does not ignite and the fan does not come on. If I switch the thermostat fan to "On", the fan will turn on, but in "auto" nothing happens. The thermostat does say "heat", but nothing happens. Any help would be appreciated.
Thank you. Frank |
||||
Check out some similar questions!
The led is continuesly flashing. It says under the codes, normal call for heat. I have flipped the breaker, and turned the main switch on and off and on. Cleaned the fliters. What is my next step. Help please, it is cold Steven
No 24vac at thermostat, no 110vac at transformer in xr80 cabinet. Circuit breaker is OK. Where/what do I check next?
I have a trane xr80 the lite is off. My ac is not working either. Could it be a fuse on the outside? I took the fuse from the house to ace hardware and they tested it. It is okay. What do I look for on the outside?
I have a Trane xr80 that's about 5 yrs. Old. Everything starts (pr-fan-burner-ect.) but the blower never kicks on. I need help troubleshooting the blower circuits.
My Trane XR80 furnace is only blowing cold air. The diagnostic light is bllinking 4 times. I checked diagnostic codes and this one means (open limit device). Please clarify which part(device) needs to be replaced?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
