Ask Experts Questions for FREE Help !
Ask
    coastspa's Avatar
    coastspa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2013, 03:20 PM
    Control panel not lite after turning breaker off then on
    The control panel was blinking, turned circuit breaker off then on to reset. The panel never came back on. Any ideas?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 31, 2013, 03:44 PM
    Sure you reset it properly?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Dec 31, 2013, 07:10 PM
    Control panel for what?

    Did you push the breaker all the way to the OFF position before setting back to the ON position?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Main panel breaker feeding sub panel [ 10 Answers ]

I have a 200 amp main panel, not using all the spaces provided. I would like to run a feedr line to a detached garage to use as a wood and metal working shop, with 220v compressor, welder and Nissan Leaf charging location. Other tools are 110v with varying loads. I will likely be using one or two...

What does blinking purge lite on home air conditioner panel mean [ 0 Answers ]

The home air conditioner has the purge light blinking on the control panel. What can I do to resolve issue?

70 a sub panel with two 15a breakers what size breaker to feed panel [ 2 Answers ]

70 a sub panel with two 15a breakers what size breaker to feed panel

Bathroom GFI outlet trips breaker at breaker panel [ 2 Answers ]

Hello all. Our house is approximately 13 years old. Each morning when both the iron and blow dryer is plugged into two separate GFI outlets in the master bathroom, the circuit will trip the 15 amp breaker in the breaker panel. Is it possible to upgrade the breaker to a 20 amp without...

Breaker size in main panel to support sub panel? [ 7 Answers ]

Hello, I am wiring a sub-panel to the outside of my home (50 feet from main 200 amp box). I ran 3 wire - 6 gauge. What is the largest 2 pole breaker I can put in the main panel to supply the sub-panel. TYPE NM-B 6-3 WITH GROUND 600 VOLTS CIRTEX-I EZ-STRIP (R) PLUS 17:11 2/5/07 SB/RC ...

View more questions Search