Ask Experts Questions for FREE Help !
Ask
    BlueEyedGoddess's Avatar
    BlueEyedGoddess Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 22, 2013, 05:54 PM
    Priming a deep well pump
    I had to replace my deep well pump. I have primed it about 12 x's. I fill the pump till overflow, replace the screw and plug in. The gauge doesn't fluctuate at all. It stays on zero. What is my next option?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 23, 2013, 07:48 AM
    If your losing prime the first thing I would be checking is the foot/check valve. Replace that valve and I think you be back in business. Let me know how you make out. Good luck, Tom
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Dec 23, 2013, 03:15 PM
    When you prime it, and the plug is out, does the water level stay full? Watch it a few minutes. If the FV is the problem, then the level will drop.

    Blue-eyed goddess?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pump priming [ 1 Answers ]

How do I prime my sprinker system pump

Pump priming [ 1 Answers ]

Today I tried to have my house power washed and within less than half an hour my water pump was drained with no pressure reading on the gauge. AS I have done before, when pressure goes below about 20 lbs, I shut of pump. After it stands for a few hours it will usually begin to pump and fill my...

Deep well priming not getting water pressure [ 3 Answers ]

I have prime my deep well pump, several times water seems that it is getting into the line but it is not holding pressure at all. The pump is running and only holding at 10 and not at 30 as it should. I have tried everything that I can think of and I am at my end of my rope. Any answers please...

Priming the pump [ 1 Answers ]

My parents are out of town and when I came to check on the house I went to the restroom and flushed, it wouldn't no water was in the tank, I have heard my dad talk about sometimes he has to prime the pump, I'm wondering how I do this?

View more questions Search