Ask Experts Questions for FREE Help !
Ask
    DJM66's Avatar
    DJM66 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2013, 11:58 AM
    Craftsman 11hp snowblower primer hose not getting fuel
    Engine turns over when quick start is sprayed into carb…then stops within seconds…does not appear to get any primed fuel even though priming tube looks fine
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Dec 17, 2013, 12:06 PM
    I bet you've parked this over the summer with fuel in the tank? Correct? If so the carborettor needs cleaned... you have gummed up jets.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Dec 17, 2013, 01:31 PM
    When you pump the bulb do you hear a sqush of fuel and a bit of resistance? If not the dip tube may have deteriorated which is not uncommon.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

11hp craftsman riding mower parts [ 1 Answers ]

Hi, I have an older 11hp craftsman ride on mower, need to locate a mandrel for the mower deck? any ideas? Thanks

Craftsman 11hp 5 speed riding mower [ 2 Answers ]

Ran well all last summer,but now it turns over but won't run,put gas in carb. And it run till that gas is used. This is an older riding mower and need some help.also is there a place on the net that I can find a manual and diagrams of motor

My 11hp Craftsman riding mower will not start [ 2 Answers ]

My mower just keeps turning over but not starting up . I have checked everying ,all I know is I was cutting my land and it just died and now will not start . Please help thank you

Craftsman 11hp riding mower [ 5 Answers ]

I have a friend who has an old Craftsman 11hp riding mower and is having some problems. The ignition switch was broken and has been started with a screwdriver until it finally broke. I got a replacement switch today and installed it and now as soon as it is put in the "on" position the engine...

View more questions Search