Check out some similar questions!
I have a Miller furnace that I have replaced limit switch 626337 and aux switch 62639
[ 0 Answers ]
Blower will not come on when furnace comes up to temp but can turn blower on with switch in fan setting.
Brake/clutch engine start interlock switch (limit switch per Murray)
[ 0 Answers ]
I have a 12 yr old,10hp, 30inch cut Murray riding mower which wouldn't start. After eliminating the battery, starter, solenoid and ignition switch as being the problem, I found that the plate that slides backwards to depress the button on the interlock switch is not coming back far enough to...
Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan
[ 1 Answers ]
I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
York residential furnace pressure switch problem code stuck switch
[ 1 Answers ]
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals View more questions Search
Add your answer here.
|