Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
In reverse return piping in chiller chw supply & return line there is a butterfly val
[ 1 Answers ]
in reverse return piping in chiller chw supply & return line there is a butterfly valve bet end of that pipe why? What is that work or function
My vent blows hard in the master bdrm but not the others making the room hotter why?
[ 1 Answers ]
The vent in my master bedroom blows hard than the other vents making the room much hotter or colder. Even when I close the vent it blows so hard it makes a whistling noise. How can I fix this is the house is heated & cooled evenly?
Cold Air Duct Return Blows Instead of Sucks
[ 16 Answers ]
HI, I need your help. I have purchased a home that has a new Hi-Effency forced air furnace. The house has a 2 1/2 ft crawl space - no basement. The heating and return ducts are below under the floor boards of the house in the crawl space. The crawl space is insulated as are the ducts. My...
Powder room supply pipes
[ 5 Answers ]
I'm doing a rough in for a powder room and am at the point of installing the supply lines. I understand the preferred way to do this is with drop eared els and nipples that will eventually connect to the shutoffs. I see two issues with this method: 1) how can I be sure the threaded connection...
Is it better to have a return grill in every room rather than 1 big return?
[ 3 Answers ]
I just had an installer come out and look at my new construction house, we spent close to an hour trying to figure out where a 10X20 duct will run. I remember when I lived on the east coast every room had a heating return grill as well as a supply grill. Is this no longer a "good" thing to do or is... View more questions Search
|