Ask Experts Questions for FREE Help !
Ask
    jnieva17's Avatar
    jnieva17 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2013, 09:20 PM
    Generator problem
    The problem is if we synchronized two generators, it appears the same kilowatt reading but different in ampere reading.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Dec 14, 2013, 07:28 AM
    Hi,
    It is not clear how you are obtaining this synchronization. Is it through a separate device, as it should be? Without this the waveforms of the two machines could partially cancel each others' output.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace with Generator problem? [ 27 Answers ]

I have a York Two-Stage Deluxe Diamond (PDU) furnace that I have recently wired to a 6 CKT transfer switch (Reliance Controls) to use with my Coleman 6250 (5000watt) gas generator. All my ckts. Work well with the generator connected, except the furnace. I switched ckts on the transfer switch-no...

Generator Problem [ 0 Answers ]

I have a 2.6 KV Generator it used to be very easy to pull start, but now I feel like there is back pressure resistance,that neally rips my arm off. Has any body had a similar problem

Generator Problem [ 17 Answers ]

Hello, My problem is this,I was given a new portable generator by my father-in-law.He bought a new generator from Max tool.com and it turned out to be no good (the one he gave me). I set up his generator to backfeed his service(residential application) in times for when the power goes...

Generator problem [ 1 Answers ]

I recently purchased a 6750 watt generator when our power was out for 3 days. It worked everything well except for the gas furnace. The furnace initiated and then gave an error code related to the voltage. When measuring the voltage across the generator I get about 140v but also can measure 50v...

View more questions Search