Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Issue with Hot Water Flow/Pressure
[ 4 Answers ]
I'm going to start with the fact that I have pretty much no knowledge of plumbing or really home repair so there may be a very simple answer that I just don't know. But I'm going to give a lot of detail, much of which may be extraneous but I don't want to leave anything out. I live in a condo. ...
Issue with hot water & pressure for 2 back to back shower units.
[ 0 Answers ]
We have 2 levels in the house with 2 water heaters. Hot water & pressure is fine to the entire house (including the upstairs bathroom sinks), however, recently we lost both hot water & pressure to the 2 upstairs showers.
Hot water pressure issue
[ 2 Answers ]
We are on well water, cold water pressure is fine--hot water pressure is almost none existent. Our hot water is integrated through our furnace and it is 30yrs old. We have been in our house for 4 yrs and the hot water pressure was not an issue until the last 6 months. Would it also effect how...
Hot & Cold Water Pressure An Issue
[ 3 Answers ]
We recently bought a house. Our water pressure is terrible and the hot water is even worse. :( (Basically dribbles out.) Are the two problems correctable by adjusting the "cut-in, cut-out" pressure? The well is about 50 feet from the house. Pressure tank inside the house in the basement which is... View more questions Search
|