Ask Experts Questions for FREE Help !
Ask
    beefy21's Avatar
    beefy21 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2013, 12:53 PM
    How far set electrodes
    OK I have a oil furnace and my eletrodes is work but they sound like its going to blow up when it turn on and when it goes off
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 2, 2013, 08:26 PM
    Without knowing what kind or how old the burner is, all I can do is give you some generic settings which work on many older & some new burners.
    Set the electrode tips 1/16" ahead of the nozzle face, 5/32" apart, & 7/16" above the nozzle center.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air conditioner compressor electrodes are burnt [ 0 Answers ]

Why are my central ac electrodes burned

When set up ask press enter to set up windows then no reaction on the keyboard [ 1 Answers ]

Place a windows cd in PC. When boot it ask "press any key to boot from cd. When I press any key windows set up starts. Now here is the problem when it get to the next screen if yuor'e num lock are on the light goes dead and when it ask you to press enter to set up windows the are reaction on the...

Motion to set aside default, motion to set aside final judgment and motion to set ano [ 3 Answers ]

Hello, I'M in Florida Jacksonville, I have a small problem, I read the time wrong to appear for my small claims court trial and arrived at 11:15am but is was scheduled at 11am 9/3/09. I tried to explain but did not get anywhere, so I went downstairs to the courthouse and filed a motion to set...

Changed electrodes and will not lite [ 1 Answers ]

I have a wayne oil burner changed electrodes and nozzle furnace will not lite I was told you have to set the air flow how do you do that?

Separate Grounding Electrodes [ 1 Answers ]

Can I use separate grounding electrodes for my main service box and my subpanel as they are a significant distance away from each other?

View more questions Search