Ask Experts Questions for FREE Help !
Ask
    PDOOLEY's Avatar
    PDOOLEY Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 26, 2013, 08:03 AM
    LED light fittings
    Hi I have 8 led light fittings in the same room they are all the same 7402/led1500nw et + hfs
    The problem is the first in the loop works fine but all the rest don't and have hardly registered on the multi meter, until last night they were all working
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Nov 26, 2013, 09:02 AM
    Are these lights 120 Vac lights?

    How are they hooked up, series / parallel? Typically, if they are series connected if one light goes out they all will.

    What changed between last night and today? Are they indoor or outdoor lights?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Nov 27, 2013, 10:18 AM
    Hello - Is everything working again in time for the holiday?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers 50a50-241 led dead... no light on led, nothing works [ 0 Answers ]

Is led light supposed to stay on all the time? Mine comes on for 1 second and then goes off (blank) the transformer is powered up (27vac) but control panel and thermostat are dead. Led on controller is out, and thermostat display is blank. Do I have a bad controller? Is there any LED blink for...

Pex Fittings (shark bite fittings?) [ 6 Answers ]

Tom, Great advice I have been reading your responses and amazed with your plumbing experience! My question is that I used a 1/2 pex/sharkbite fitting to come off the copper supplies for a new shower, how do you feel about pex/sharkbite fittings? Its been in for about 8 months now, no problems.

I would like to add remote control to my pool light (Hayward LED light). [ 1 Answers ]

I would like to add remote control to my pool light (Hayward LED light). I have a indoor 15 amp remote control but it does not have ground to it. It's a 2 prong box to connect to a wall outlet and then an appliance or lights to allow the remote to turn it off or on. How can I use it to power on...

Hunter Park Hill Type 2 - Remote LED light on, but Light/Fan not working? [ 2 Answers ]

Remote Control LED light is on, but the Hunter Park Hill Type 2 Model 20578 Light or Fan will not work... why?


View more questions Search