Ask Experts Questions for FREE Help !
Ask
    Krivan304's Avatar
    Krivan304 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 12, 2013, 05:25 AM
    Comfortmaker Heat Exchanger issues...
    I have a Comfortmaker GUA... that starts up and turns itself off shortly after the flame ignites. What could the problem be?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Nov 13, 2013, 09:04 PM
    What is "shortly"?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat Exchanger [ 1 Answers ]

Where is the heat exchanger located on a Carrier WeatherMaker 8000 gas furnace so I can check if it is cracked?

Comfortmaker RPJ Heat Exchanger blower fan and ac unit [ 61 Answers ]

I have a Comfortmaker RPJ model G-011 400050 - 08M -PD that when the power is turned on to the unit, the blower fan runs continuously and the outside AC unit runs continuously no matter what mode is set at the thermostat. (A/C or Heat). I just moved into the place and the thermostat looks like it...

Blower Fan on gas Comfortmaker RPG Heat Exchanger runs intermittently [ 3 Answers ]

Hello, I'm new here, and I've been reading a lot (well, 4 or 5 pages anyway) of what's already been asked, and I haven't found my specific problem... yet. This gas hot air furnace was installed circa 1987? So, Here's what's happening. (I actually timed these cycles with a second-hand.) Turn...

Heat exchanger [ 1 Answers ]

I'm planning a radiant floor heating system for the basement and going to use a copper brazed plate heat exchanger. Any recommendations which manufacturer to choose? How about Brazetek? http://www.brazetek.com

Gas heat exchanger won't start on Heat Pump [ 1 Answers ]

I have a two year old. York heat pump model GFD04821G with a G9YS100C20DH11H gas heat exchanger and York T8411R1443 thermostat that has been acting up the last few days. The other day I woke up with no heat. I looks like the installer set this system up so it uses the resistive heat coils for...


View more questions Search