 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York Furnace Troubleshooting
I have replaced the exhaust motor and it worked for a few days then it would only blow cold air the exhaust would come on then the blower right away. The baord was replaced then it did the same thing again the last 2 times the error code says open limit
|
||||
Check out some similar questions!
I have a new York hybrid heat pump/ furnace system. Now in first cold weather snap. Notice that heat pump and furnace are both running simultaneously. I thought the unit was to switch over so that just furnace runs in very cold weather. I gets pretty loud with both units operating. Is this the way...
I have a York Stellar Plus forced air gas furnace (High Efficiency) manufactured before 1993 that is leaking water in back side onto the sub floor. Condensate lines all are clear but have moisture in under the combustion chamber and under the AC exchanger. I cut the pvc condensate line at low...
My York gas furnace is not heating and the red light blinks intermittently 3 times. Fun is working. Anyone knows what to do? Thanks
HVAC replaced circuit board on my york gas furnace New board has a green light that flashes continuously on/off about every 1 second When furnace is running this light changes to red and flashes at same rate Is this normal?
York furnace, thermostat calls for heat, hot surface ignitor glows, flame in burner box lights for about 1-3sec and then goes out, already replaced flame sensor, any ideas/
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
