 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Energy Mate Wood Furnace External Thermostat Problem
I have an Energy Mate wood furnace. It had temprature operated fan switch in the stove. I put a low voltage thermostat on the wall. It worked perfect for about 3 days then burned out the thermostat. I then put a high voltage thermostat up and now when it reaches temp, the fan short cycles. What have I done wrong?
|
||||
Check out some similar questions!
Where is is located? Is this potentially the issue if the fan blower will not stop. This is a wood furnace
I have an old wood furnace that I use for heating our home. Recently it has been acting funny. There is a switch on it where you can turn it on to blow air into the stove to get the fire going and then on the other side of the switch it has auto where the inside theromstat controls it. Well so you...
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
I need help. I have a gas Amana furnace that I have hooked to one thermostat (4 wires) and then a second thermostat (2 wires) hooked for only the fan to come on with use of my outdoor wood furnace. When the 2 wire thermostat call for the fan to come on, the outside compressor will come on. It...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
