Ask Experts Questions for FREE Help !
Ask
    Randy d's Avatar
    Randy d Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2013, 09:49 PM
    Gmp075-3
    Goodwin Gump075-3 fan comes on ,glowplug lights up ,hear a click but doesn't light burners ,no flames ,glowplug goes back out .can't get it to ignite the flames ,tried several times still nothing.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 7, 2013, 09:01 PM
    Is the gas valve set to "on" ? Check for 24 volts AC between the two terminals on the gas valve. You should get 24 volts (+/-) sometime shortly before the ignitor goes off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gmp075-3 troubleshooting [ 0 Answers ]

The main blower comes on by itself and it tries to light, led blinks constantly... is the transformer bad or what?

Gmp075 3 rev b [ 1 Answers ]

What ton is the GMP 075-3 REV B gas heating unit?

Gmp075-3 [ 0 Answers ]

Goodman Furnace Model #GMP075-3 Rev B Serial #9703821053 The Red LED on the control board blinks 4 times. Cleaned it entirely with compressed air. Light indicates limit switch open. Not sure what that is or where it is located. Diagram shows red wires. Behind the gas control, there is a long...

Goodman GMP075 [ 1 Answers ]

the furnace is tripping on high limit , not rollout. It will initiate a call for heat. The flue fan will run the air switch will make and the ignitor will glow. The MV comes on and the furnace lights. It continues to run for appr. 2 minutes and the high limit will open. It is not a variable high...

View more questions Search