Ask Experts Questions for FREE Help !
Ask
    gouldrobert's Avatar
    gouldrobert Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2013, 07:39 AM
    What is a multi tapped motor
    What is a multi tapped motor
    gouldrobert's Avatar
    gouldrobert Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Nov 4, 2013, 07:45 AM
    What is a multi tapped motor
    Purpose of a summer/winter switch on burner and supply fan
    gouldrobert's Avatar
    gouldrobert Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Nov 4, 2013, 07:51 AM
    What is the purpose of a summer/wimter switch which control a burner and supply fan
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Nov 4, 2013, 03:16 PM
    Since the cooled air is heavier, some units run the RPM up in Air and lower in Winter since the heated air is less dense.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #5

    Nov 4, 2013, 04:58 PM
    Normally the "summer" setting will run the fan all the time. Mobile Home?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #6

    Nov 4, 2013, 05:00 PM
    Multi tapped is another term for multi speed.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does multi stage heat pump require multi stage thermostat? [ 1 Answers ]

I'm confused, I have two different contractors telling me two different stories. One says the unit we have switches on its own from low to high stage A/C, the other says we need to change out the thermostat to make it switch from low to high and when, etc.. The unit is a heil PHM348KT0A1 and...

Replacing a 3 wire GE furnace blower motor with a newer Dayton 4M098G multi speed mo [ 1 Answers ]

My GE furnace blower was a very simple, 5 wire installation, which the bearings wore out on. I am now truing to convert the wiring to adapt to my older furnace, and the new motor has more wires, and different color wires, and the schematic on the motor is too simple, it does not address the...

Are there jumpers on a multi hp condenser fan motor to set the hp? [ 1 Answers ]

Just bought a 1/6-1/3 multi-hp motor to replace a 1/5 hp motor. Do I have to set jumpers/wiring to the correct hp? If so, where are they located?

Replace 1/4 hp condenser motor with multi hp AO Smith motor and Condenser [ 1 Answers ]

I am replacing my Payne 1/4 hp condenser motor with an A.O. Smith multi HP motor. I'm also replacing the capacitor (a round three prong piece) with an oval (two prong piece). In looking at the wiring diagram I'm supposed to connect the wires as follows: the two brown wires to the capacitor,...

Multi speed motor switch [ 21 Answers ]

I have an old blower motor with squirrel cage from an old furnace it is a 4 speed motor I would like to know how to install 4 separate switches 1 for each speed. It is for use in a workshop . Sometimes I need low for air circulation sometimes need a higher speed for various uses.

View more questions Search