Ask Experts Questions for FREE Help !
Ask
    Jab1224's Avatar
    Jab1224 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2013, 05:23 AM
    Quatro consolidated industries heater
    The ignition lights up and fan come on but the burners don't light up
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 4, 2013, 05:11 PM
    You need to verify you are getting 24 volts AC to the gas valve. This should happen somewhere between the time the ignitor starts to glow & the time it shuts off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Quatro consolidated industries furnace flame seņor [ 1 Answers ]

Furnace will not turn on

Quatro industries heaters? [ 0 Answers ]

I have quatro industries heater. The blower does not turn off. It is flashing one long flash which indicates an open circuit. Any ideas

Quatro Consolidated Industries heater [ 4 Answers ]

The heater lights up and the fan motors turn on, I can see all burners are lit but the heater does not go to the next step of blowing the hot air through the ducks it turns of and the timer led flashes twice and that indicates a primary limit circuit open error. This heater is 16 years old and in...

Consolidated industries furnace true blue 90 quatro gas valve [ 0 Answers ]

Hoe do you replace the gas valve?

View more questions Search