Ask Experts Questions for FREE Help !
Ask
    amolsd_9783's Avatar
    amolsd_9783 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2013, 10:23 PM
    Production circular
    I want to send a mail to all production team for congratulating achievement of produaction target & want to invite all for a party for celebration.
    So please send me draft of circular
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #2

    Oct 30, 2013, 11:58 PM
    You put exactly what you said, if you want a few graphic, add them and you have it.

    Just make a simple one, no need for someone to do it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Circular motion [ 1 Answers ]

A 331/3 rpm record drops onto a turntable and accelerates up to speed in 0.6 seconds. What is its angular acceleration, in radians/s2 during this time?

Circular motion [ 1 Answers ]

Wheel A of radius ra = 9.4 cm is coupled by belt B to wheel C of radius rc = 34.8 cm. Wheel A increases its angular speed from rest at time t = 0 s at a uniform rate of 5.8 rad/s2. At what time will wheel C reach a rotational speed of 197.5 rev/min, assuming the belt does not slip?

Circular motion [ 4 Answers ]

A small block sits 0.15 m from the center of a horizontal turntable whose frequency of rotation can be smoothly increased. If the coefficient of static friction between the block and the turntable is 0.55, at what frequency will the block begin to slide off? (Draw a force diagram). f_s = U_s F_n...

Circular motion [ 1 Answers ]

To make billy tea correctly, the billy must be rotated in a vertical plane so that no tea spills at the top of the circular path. What is the greatest time in which one complete wirl of the billy must be completed? (take your arm as being 0.6 m long) I got 1.55s, but the anser says 0.65s,...

Circular Function [ 1 Answers ]

Hi there could you please help me with this questions, struggling here. A harbour experiences a tidal change in water level at port between 4 metres and 8 metres. The peiod of successive low tides is about 12 hours. If a boat has a draught of 2.5 metres when empty and 6 metres when full (and the...

View more questions Search