Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fan on furnace runs and then won't kick on to heat when thermostat calls for it.
[ 0 Answers ]
The furnace fan runs quite a bit and then when the temp drops and the heat should kick in, it doesn't. If I shut it off and restart, it will work just fine.
Electric furnace fan runs no heat limit switches and heating elements ohmed good
[ 0 Answers ]
York eb10b split system any ideas will be helpful
Heat Elements
[ 0 Answers ]
Where are the heat elements located on a Coleman Evcon Electric Furnace Model #EB15B, serial # 971045594? Thanks Frances P. Smith [email protected]
Fan on electric heat/cooling unit will not kick off
[ 10 Answers ]
Our electric heating cooling unit continuously runs. During the winter we had to run the heat on emergency heat because the unit would not kick, the house always stayed comfortable. Now we have attempted to run the unit the last 2days (for the first time for this spring) it cools very well but...
My Trane Auxiliary heat on heat pump is tripping breakers. I think all 3 elements are g
[ 0 Answers ]
All 3 white control wires on 3 contactors to elements gets energized at the same time even when only calling for 2-3 degrees increase. Is that normal? I thought it was setup to increase elements based upon the amount of heat called for? The point is breakers keep tripping in winter for the last... View more questions Search
|