Ask Experts Questions for FREE Help !
Ask
    CynthiaCelino's Avatar
    CynthiaCelino Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 29, 2013, 07:02 AM
    How to re-install moen faucet after replacing o-rings
    I had a leaking "manor" model moen faucet, so I replaced the cartridge and the o-rings on the base of the faucet and the collar diverter. Now, I am having a hard time getting the parts to go back on to put the faucet back together. The collar diverter refuses to go back down on the base correctly, and in turn the spout won't go back down correctly so that the rest of the parts can be returned to their proper places. Is there a trick to this? I am about to pull out my hair. It was easy enough to replace the cartridge and the washers, but why on Earth won't it go back on the same way it came off? Please help.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Oct 29, 2013, 08:12 AM
    Reinstall the cartridge with the stem in the open position. If you try to install with the stem closed position you have to over ride the air trapped in the valve to get it in far enough. With stem in the open position, the air can come out as you push the cartridge in.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Oct 29, 2013, 08:13 AM
    Hi Cynthia

    Good suggestion by Hkstroud...

    Also, if I understand the issue at hand here, I'd suggest purchasing some silicone GREASE so you can lubricate the Orings and the body of the valve... should go together a little easier after that!

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to replace moen O-rings on a kitchen faucet [ 6 Answers ]

In want to know how to replace o-rings on a moen kitchen faucet. This faucet has separate valves for hot and cold, so I don't believe there is a cartridge involved.

Replacing moen shower faucet cartridge valve [ 4 Answers ]

I have a 1988 moen single handle shower faucet that won't stop dripping. I took it apart, removed the u-shaped pin, but how do I remove the cartridge to replace the washers?

How to Replace "O" Rings On Moen 7400 Model Faucet [ 2 Answers ]

How do you get the stem out to replace "O" Rings?

Replacing delta shower faucet o-rings [ 3 Answers ]

My shower is leaking when I turn on the shower. I have a delta shower and when I turn on the water as if I'm going to take a bath and then adjust the temp... the water will leak... then when I turn the shower on, the leak will go away... I'm guessing the o-ring or o-rings need to be replaced, but...

Replacing older Moen tub faucet [ 7 Answers ]

First, let me say I'm plumbing challenged, so I hope I can explain this correctly. The Moen tub faucet with diverter that was installed new in my new house 7 years ago has broken. I went to the store to buy a new one but can't find a similar one anymore. The broken one has a 3/4" attachment...


View more questions Search