 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant error code 33
Our heater is flashing an error code 33. The furnace turns on and off before getting up to the temperature that it is set at. The thermostat loses power completely when this happens, and when it comes back on the letters AC are showing on the display. It then shows the temp and the furnace kicks back on... until this all happens over and over again. We have had 2 out of 4 rollout switches replaced, still waiting on the other two. I would like another opinion on this? Any ideas?
Thanks! |
||||
Check out some similar questions!
Hello! I'm new on here so bear with me. I found a similuar post on the Bryant 80 but I believe I have a different model... not sure how much that matters. The only model number I could find on the unit was CK5AXA036017AAAA The Error code is 33 Limit or flame roll out switch is open. The furnace...
I have a Bryant Plus 90i furnace flashing error code 43. I'm pretty good at fixing it so far. It's 17 years old and I've replaced the blower and inducer motors. All that seems to be fine. I just check the ususal. New filters are in to give max airflow. Checked and cleaned the condensate trap...
I have a bryant 395cav042091 +80. Got a new puppy that chewed up the thermostat lead to the cenral air unit outside. I repaired the wires leading to the central air but the furnace is flashing a code 24 (secondary voltage fuse is open) and nothing works. Tried Disconnecting thermostat leads and...
Our furnace worked last night but this AM it didn't. It's a 3 year old Bryant 352MAV, installed horizontally. It's giving error 32. I've spent much of the day working with it. I'm more than handy but don't really know much about hvac. I found that the idiots that installed it (and who are now...
Bryant Plus 80 furnace - Error code 31 What are the corrective measures to put this furnace back to producing heat? There is power, the fan works but there is no heat. We lost power recently but it worked after that. Last evening there were high winds which were indicated on the code...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
