Ask Experts Questions for FREE Help !
Ask
    creatrix's Avatar
    creatrix Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2013, 07:31 AM
    Where would I find the zone valves
    I have 2 zone oil heat zone 1 works fine but zone 2 doesn't work. Where would I find the zone valves on the furnace?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 28, 2013, 06:27 PM
    Furnaces don't have zone valves. Boilers sometimes do. Is this hot water heat?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Oct 28, 2013, 08:16 PM
    Forced air or water? What controls zones?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Zone valves, do they go on the return side or the supply side on two zone system? [ 1 Answers ]

Taco zone valves [ 1 Answers ]

Will a taco zone valve head 555-050rp work with 555-102 unit?

Are zone valves or zone thermostats possible with a steam boiler? [ 1 Answers ]

I have an old 4 story building with one thermostat controlling the steam heat to all floors. There is a commercial space on the ground floor and they are complaining that they don't get enough heat sometimes (and on occasion get too much!) They have suggested that there is some way to place a...

Wire zone valves [ 3 Answers ]

I have a oil fired boiler with taco 562 zone valves.My wires are from transformer red&green.Wire from thermostat are red& green.On my zone valves the wires are red,green&yellow.Aperson who said he could fix zone valves had taken all wires off the zone valves.The zone valves have numbers 1,2,3,which...

Zone valves [ 2 Answers ]

Looking for a wiring diagram for a new dunkirk boiler . Just the diagram for the 3 zone valves. Company says that the boiler transformer is enough to run three zones ( 24v) . Or do I need to add transformer. Just can't figure out the wiring from one zone valve to another. Contacts on each zone are...

View more questions Search