Ask Experts Questions for FREE Help !
Ask
    BlueTick55's Avatar
    BlueTick55 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 27, 2013, 04:41 PM
    Error code 2 red flashes for rheem furnace
    Igniter does not spark, induction motor runs, no burner flame.
    2 red flashes on board - Rheem RKKA
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 27, 2013, 06:14 PM
    There should be a key to the blink code either on the inside of the blower door or on the board itself. Tell us what a '2' code is & we might be able to help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t [ 2 Answers ]

Code flahes 3 short flashes by 1 long flash

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

Rheem furnace red light flashes 5 times [ 2 Answers ]

Furnace is Rheem classic 90 plus When thermostat not calling for heat red light flashes 5 times. When furnace is heating red light flashed 8 times. Is this a problem?

Still have error code on Bryant gaspac 8 flashes [ 6 Answers ]

For Northernheat Still getting code of 8 led flashes. Have checked the flame sensor not cracked or touching anything and is in the flame. The only time that it seems to happen is when the temp gets colder like 32/34 after being 38/40. The LED error code states Internal control fault ...

Trane Furnace error code = 2 flashes, what does system lockout mean? [ 1 Answers ]

I have a Trane forced air furnace which recently has had periods when it blows unheated air. When I looked at the furnace during these periods it shows 2 flashes, which according to the instruction manual is an error code which means: System lockout, retries or recycles exceeded. I don't...

View more questions Search