Ask Experts Questions for FREE Help !
Ask
    wildcatnico's Avatar
    wildcatnico Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2013, 05:19 PM
    Intertherm Gas Furnace Troubleshooting
    my furnace won't stay lit the pilot light will stay lit until I turn on heat then furnace will light an burn for about 30 sec then go out also pilot goes out

Check out some similar questions!

Intertherm furnace troubleshooting [ 11 Answers ]

Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...

Intertherm Furnace Troubleshooting E2EB015HB furnace kicks on when suppose to and off [ 1 Answers ]

Furnace kicks on and off when suppose to but when blower shuts down the heating element doesn't have to flip switch to shut off element

Intertherm furnace troubleshooting [ 0 Answers ]

1986 intertherm electric furnace<only blowing cool air on heat setting. I inspected the heat coils and they don't look broken

Troubleshooting a Intertherm Furnace [ 0 Answers ]

Our Intertherm furnace in seems to be on a short cycle, running more often than would seem necessary. Any ideas?

Intertherm furnace troubleshooting [ 2 Answers ]

My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.