Ask Experts Questions for FREE Help !
Ask
    gabbee101's Avatar
    gabbee101 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2013, 06:08 PM
    Complete light flashing but dishwasher won't work.
    We have the 665.13933K015 Kenmore Elite dishwaser. The clean/complete light is flashing and we can't get it to work at all. Any ideas to fix it?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Oct 25, 2013, 07:27 AM
    Look at these: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
    https://dl.dropboxusercontent.com/u/...ishwashers.zip
    Press: Heated Dry, Hi Temp Wash, Heated Dry, Hi Temp Wash, close the door, Start, Open the door, Cancel 2x.
    Or:
    1. Unlock you Kenmore dishwasher control panel by pressing and holding "Heated Dry" button for four seconds.
    2. Press a series of four buttons in quick succession: "Heated Dry," "Normal Wash," "Heated Dry," and "Normal Wash" to instruct it to run a short diagnostic test.
    3. Wait for two minutes while it runs the test.
    4. Press the "Cancel/Drain" button once it has completed its test. This should reset the dishwasher control panel and stop the "Clean" light from blinking repeatedly.
    If this does not work you may have a safety tripped. Make sure to check the filters and the float at bottom of tub.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher model #665.1703, Flashing light-won't start [ 118 Answers ]

I have a Kenmore Ultra Wash Dishwasher. It will not start. The light above normal wash is flashing continuously. Any advice will be helpful. Our warranty ran out 9 days ago:rolleyes: Thank-you in advance:o

Kenmore Ultra Wash dishwasher model 665.1374, flashing light-won't start [ 0 Answers ]

Smart cycle buton light blinks. No other wash option buttons work including start. The cancel button does turn off the blinking.

Kenmore Ultra Wash Dishwasher model 665.13779, Flashing light and won't start [ 0 Answers ]

Does anyone know the reset code for model 665.13779? The red lights on the "normal wash" and "cancel" buttons flash and the washer is completely unresponsive. I've found reset codes for just about every model but this one! As an alternative I tried this, and it seemed to work momentarily. So...

Kenmore built in dishwasher green clean light keeps flashing and won't go off [ 0 Answers ]

Not allowing me to turn the dishwasher on to do dishes I tried to trip the breaker and the green light just keeps flashing

View more questions Search