Ask Experts Questions for FREE Help !
Ask
    cntgtright's Avatar
    cntgtright Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 23, 2013, 05:36 AM
    Weatherking furnace not firing
    Was running intermittently. Now digital thermostat is not lit and furnace flashing vent pressure switch code. What's up ?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 23, 2013, 06:04 PM
    Check the vent system for restrictions or blockage.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GMP furnace not firing up [ 0 Answers ]

First cold and she she's not firng up. The fan runs for a time but the burners are not firing. Glow plug gets hot but no gas. Flame sensor? Can it be tested?

Weatherking furnace won't keep heat [ 0 Answers ]

My furnace will not keep the heat that it is set for. We've had multiple service guys look at the furnace and no one can tell me what the issue is. They changed the circuit board twice and the problem is still there. The blinking light on the furnace means that is is locked out for the hour. It...

Weatherking furnace repairs [ 1 Answers ]

I just replaced the Heat Sensor, It fires up but will not stay on for no more than 10 seconds

Why is my furnace not firing up? [ 12 Answers ]

My goodman furnace is not firing up. It turns on but it's not firing up so there's no heat coming out. Have dad this problem for about a month now. Please help, my house is freezing cold! Thank you...

Furnace only firing in one zone [ 1 Answers ]

Hello: I have a digital thermostat and gas heat (forced hot air). When I turn the heat on upstairs, the blower only blows cool air. When I turn it on downstairs, it works normally. I checked the fuse box to see if a fuse had been tripped, but it was normal. What other simple steps can I take...

View more questions Search