Ask Experts Questions for FREE Help !
Ask
    wroy642's Avatar
    wroy642 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2013, 11:55 AM
    917272140 blades do not engage
    Mower Deck Blades do not engage when the switch is pulled out.
    Model: 917.272140
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Oct 18, 2013, 01:04 PM
    Try here: Tools & Power Equipment - Ask Me Help Desk

    And maybe give some more info, like the brand.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blades will not engage on Craftsman ZT7000 [ 2 Answers ]

I was trying to get my mower running for the first time this year. I had to replace the battery first. While connecting the positive lead on the battery I accidentally touched the negative lead with the wrench and caused a small fireworks show. I didn't think much about it until I tried to start...

Blades don't engage [ 0 Answers ]

I have a L2548 john deere lawn tractor. I have check sit switch and replace. My pto switch came on but quit, came on and quit, then wouldn't engage again. What could it be? I check all the electric and fuse, however, I didn't replace fuse,

Sputtering engine when blades engage [ 1 Answers ]

I have a Scag zero turn walk behind commercial mower around 10 years old, 16 HP Vanguard engine. It starts fine, idles fine, even runs pretty good when the blade is engaged most of the time. After a few minutes of the blade being engaged the motor sputters terribly. I can disengage the blade and...

Blades will not engage [ 2 Answers ]

We have a 2003 Craftsman riding mower. The mower will start but you cannot engage the gears. Any help?

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...

View more questions Search