Ask Experts Questions for FREE Help !
Ask
    fairfaxhelp's Avatar
    fairfaxhelp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2013, 09:12 AM
    What is a figure 4 fitting
    Can someone describe or draw a figure 4 fitting for me
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 17, 2013, 09:22 AM
    I've been around awhile and never heard of a "figure 4 fitting". Where did you get a nomenclature such as this? Double "Y" perhaps?
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
    		  
    #3

    Oct 17, 2013, 11:38 AM
    Sounds like a reference to a drawing for a specific project where the draftsman drew details of some particular fittings and applications and labeled the details as Figure 1, Figure 2 etc.
    Then, folks on the project started referring to the item identified in Figure 4 as a Figure 4 fitting, and are still using the term on other projects, erroneously.
    I could be wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pipe not fitting inside fitting [ 6 Answers ]

Have PVC pipe 1/2 inch . See enclose picture of 1/2 connector But pipe doesn't go inside. Diameter is 1/2 but did go inside it has to be smaller maybe for a 3/8 size pipe. What do you think

If your deposits is one figure but you come up with a lesser figure so how do I get a [ 3 Answers ]

I need a monthly revenue so the bank statement is less than the gross income is about $40 thousand that was not deposited so how do I get the monthly revenue from that and the checks were wrote to personal not to the co so it was deposit inpersonal but I have to show this amount how do I do this

Fashion figure n normal figure [ 2 Answers ]

What is the difference between a fashion figure and a normal figure.

NPT Fitting connection to Flare Fitting? [ 2 Answers ]

I am replacing the propane Cook-Top, 4 burner in my boats' galley (location USA) with a new one made in Italy. The new one has a Compression Female fitting on the propane input, and a adapter 90 degree elbow Male Compression/Male NPT fitting that came with the stove. I bought a 20ft. Propane 3/8...

View more questions Search