Ask Experts Questions for FREE Help !
Ask
    Ronabbott40's Avatar
    Ronabbott40 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2013, 08:25 PM
    Lennox boiler gets to hot and melts combustion moter off
    Have replased combustion moter exspation tank carttreg in cerculation pump bled off all air and the cerculation pump and cumbustion moter still get to hot to put your hand on any ideas thanks
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 16, 2013, 04:39 PM
    Your question is impossible to read. Try again?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox combustion air inducer? [ 0 Answers ]

Our Lennox furnace starts up, but it won't stay on. You have to keep turning it on and off by the thermastat. If you turn the temp up to 80 degrees, it'll stay on. Does this have anything to do with the combustion air inducer, or the motherboard, or is it something else?

Lennox G51MP combustion air inducer failure [ 12 Answers ]

Why do I keep having combustion air inducer failure with Lennox G51MP

Lennox combustion air inducer noise issue [ 0 Answers ]

Have a Lennox gas #G40UH48C11005 furnace from 12/2003 that is making a "bearing" type noise at start up, as the ignition starts the noise quiets. Am I looking at replacing the entire inducer and if so can a part #/cost be made available online?

Boiler Combustion Air Proving Switch [ 2 Answers ]

I have 4 industrial boilers that range from 40klbs/hr to 60 klbs/hr. Currently, we have 2 types of air proving switches: Cleveland controls AFS-951 and an old Honeywell that I cannot read the part number. My operating combustion air pressures run from 8-20"H2O. The Cleveland controls switch...

Lennox whisperheat pilot won't stay lit after combustion [ 1 Answers ]

I have a Lennox whisperheat furnace with electronic ignition.It clicks and lights the pilot for about a second (with a pretty blue flame)then it clicks and the pilot goes out.I know the clicking is a gas valve working,but other than that I don't know.Why won't it stay lit and ignite?Your help would...

View more questions Search