 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Toilet takes two flushes every time!
1. The water level in the bowl is very low before the first flush and bubbles a little when the first flush is made.
2. After the 1st flush the water level is much higher in the bowl. 3. Works great on the second flush EVERY TIME! PLEASE HELP... is it a clog? |
||||
|
||||
|
Hi Taylre20 Lift the lid to the tank and see if the white (or black) plastic tube that goes from the fill valve is inserted into or at least connected to the overflow pipe in the center of the tank. If the tube is not directing water into the overflow pipe after you flush the toilet then connect the tube so that it does send water into the overflow pipe when the toilet is flushed... should resolve the issue!
If that is not the issue at hand, report back with your results and we'll see what else we can think of, OK? Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
When I flush it looks like its going to flood but it doesn't go all the way up and it finally goes down slow and fills up slow
We have changed the handle and the flapper in the flush box, and ran a snake down the drain to make sure its not pluged. What else can we do to get it to flush properly? Also why doesn't it seem like there is enough water getting into the bowl after we flush it, then the next time it flushes...
I live in a two level condo. When my neighbor who lives behind me flushes his or her toilet, my toilet on the first level flushes as well. It's not a full flush, but when I take the lid off the tank, the refill valve is open and water seems to flow from the tank into the toilet. I'm not sure why...
When I flush my toilet the water in the cistern is taking all day to fill up, any help out there
View more questions Search
|
