Ask Experts Questions for FREE Help !
Ask
    maccahutton's Avatar
    maccahutton Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 7, 2013, 01:48 PM
    Metal
    Metal song I believe, a `fan cuts one of them with a knife, then he goes into some trip. Sofa/couch swallows him or something. From the 2000s generation. Worm/Who words comes to mind but might not be anything to do with it haha. Thanks

Check out some similar questions!

Dead bolt installation in a metal door specifics, Can it be done to all metal doors? [ 2 Answers ]

Can all you install a deadbolt in all metal doors. Or are there some with foam core construction that you should not attempt installing a deadbolt. If it is possible on a metal with foam core residential door (1987 construction) Do the screws that hold the deadbolt to the edge of the door...

Am replacing metal roofing on bay windows Can shingles be placed over metal roof? [ 3 Answers ]

Metal is not copper. Also, does anyone know what the overhang should be (for shingles on bay window roof). Thanks

Front of dryer making metal on metal scrape [ 0 Answers ]

GE hot point dryer. Front of drum is scraping on the front panel it seems. I can pin point the noise as coming from the area near the blower. It does not appear to be the blower. I have replaced the glide strips and ensured the felt sealer is in seemingly good condition. However I can see some...

My Altima sounds like metal is scraping metal when I go in reverse and turn left. [ 1 Answers ]

I have a 1994 Nissan Altima GXE. I had some brake work and front wheel work done around Christmas time. The control leg, an axle, and some other small things were replaces, along with the entire brake system. However, when I turn left or go in reverse, I hear this shrill, metal on metal sound that...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.