Ask Experts Questions for FREE Help !
Ask
    cmaxon43's Avatar
    cmaxon43 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 30, 2013, 07:30 AM
    Issue with shower head pressure
    We installed a completely new shower a couple years ago and the water pressure was always fine. Over the last couple of months we started noticing a dramatic decrease in water pressure whenever we set the faucet to the right temperature. We could get good pressure by turning up the hot water more, but of course it's way too hot. Whenever we put it at just the right temp, you can hear pipes rattling and the shower head starts to vibrate. We replaced the old shower head, but that didn't help. Any suggestions?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Sep 30, 2013, 08:13 AM
    Give more info on type of shower body. Manufacturer, model and number of controls.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a new shower head, and only get a low pressure cold water to come out. [ 13 Answers ]

I have a new shower head, and only get a low pressure cold water to come out. It is a Tuscany shower head/ faucet. I called the company's phone line, and they had me a) remove the rotational limit stop, and b) turn the hot & cold water valves which are on both sides of the ceramic cartridge...

1 shower head and 1 faucet have no pressure [ 5 Answers ]

I'm on a well and the control panel on the well went out. Had it repaired and all was fine. The repair guy asked me to test the water in the house. Turned on the faucet at 1 sink in my master bath. Worked great. Repair guy leaves and as I turned on the shower in the master bath, just a faint...

How do you fix low pressure at the shower head when good pressure present at faucet? [ 1 Answers ]

Good hot and cold water pressure at faucet but when switched to shower, temperature of water drops drastically (minimal hot water coming through) and water pressure is very low. Shower head has been switched, mesh has been cleaned of any debris, and black rubber ring has been changed. What can I...

Delta 1400 series too much pressure to shower head [ 1 Answers ]

I have a delta 1400 series shower just recently for some reason the pressure coming out of the shower head seemed to like double what could be the problem? This only is in that one shower Just recently my water pressure in the shower got really high to the point its uncomfortable. This only is...

Shower pressure issue [ 7 Answers ]

I have noticed my shower pressure has gotten really low lately and it barely even has enough prssure for the shower itself to come on when turned on it has a single nob for adjusting the hot/cold temp and for turning it on/off and it has the lift nob to activate the shower any idea on how to fix or...

View more questions Search