Ask Experts Questions for FREE Help !
Ask
    fernando segura's Avatar
    fernando segura Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 29, 2013, 09:33 AM
    My trane furnace is going on and off and because there is no flashes I thougth it was
    My trane furnace is going on and off and after 10 minutes stop working and there is no flashes so I thought it was the switch the problem so I changed but having the same problem now I am thinking it might be the flame sensor give me some advice

Check out some similar questions!

I have goodman furnace, the DS1 Light Flashes 6 times pause and flashes 6 times again [ 0 Answers ]

I have a Goodman Furnace. The DS1 Light Flashes 6 times and according to the light it means. 6 Flashes = Open Rollout. What does that mean

Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t [ 2 Answers ]

Code flahes 3 short flashes by 1 long flash

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

Trane furnace flashes 4 times [ 0 Answers ]

I have a Trane Furnace MODEL#TUE040A924K0 SERIAL#M182PX42G and the ignitor does not start up. I replaced the ignitor and cleaned the sensor, but the ignitor still does not work. At the control box there is a red flashing light 4 flashes pause then 4 flashes. What can I do to get the ignitor started?

Trane Furnace error code = 2 flashes, what does system lockout mean? [ 1 Answers ]

I have a Trane forced air furnace which recently has had periods when it blows unheated air. When I looked at the furnace during these periods it shows 2 flashes, which according to the instruction manual is an error code which means: System lockout, retries or recycles exceeded. I don't...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.