 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
John deere 6400 won't move
I have a john deere 6400 that won't love in gear nor will the hydraulics work proper. With the lift arms up you can here the electric housing that runs the. Lift arms running. And with the arms up the spool valve will work my bucket. Tilting the bucket up and down works. Trying to raise the bucket straight up won't work unless with the lift arms up. Any. Clue what in need to do to fix the problem. I checked the fluid and have changed both of the filters. If I turn it off and back on the tractor will move will shift from drive to reverse but then if I try to change back to drive it won't move.
|
||||
Check out some similar questions!
I too have a John Deere Lawnmower L110 that will start but will not move. I read another that had the same problem but the answer was an obvious one and one that we have tried, pushing the rod in. I have looked at all the belts and they are in tact. I have no idea what is wrong. I hestiate to...
John Deere D130 won't move after starting. I press the petal and nothing happens.
I have a 1997 john deere 6400 and the pto has stopped working. I haven't used it in about 6 months but it worked last fall. I checked the fluid level and it was fine.
My 4010 John Deer tractor won't move, when it is in gear. It has a eight gear transmission, and is fueled with proane. I believe it is a 1963 model. The bucket moves up and down good, and PTO is working. Checked transmission fluid and it is good. Starts good, and sounds great, just won't go. Any...
Lever in rear is engaged. Doesn't appear to be the issue. Battery died, had charger on over the weekend but wouldn't take a charge. New battery installed and works to start but when you step on forward/reverse pedals you get no response. Thanks in advance.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
