Ask Experts Questions for FREE Help !
Ask
    NIKKO13's Avatar
    NIKKO13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2013, 11:52 AM
    2 legs of a 3 phase circuit =
    2 legs of a 3 phase circuit equals what ?
    And does the adding of a nuetral wire change the outcome?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Sep 25, 2013, 04:45 PM
    Depends upon the incoming voltage. You could have any of many incoming voltages.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I get a 120 circuit from a 3 phase system [ 7 Answers ]

Can I get 120v from one hot wire to the neutral an a 3 phase panel?

Help wiring 1 phase 220v circuit [ 10 Answers ]

I need to run a 220v circuit for my new band saw. It requires single phase 220v 10 amp. The manual says it draws 10 amps at maximum load but later says minimum circuit size 15amp. Does this mean I should use 15 amp ganged breakers? Can I use normal 20A romex to run this or do I need special...

Wire size for 100 amp 3 phase circuit [ 1 Answers ]

I am installing a commercial convection oven rated as follows: 220V 3 Phase. The oven pulls 23 kilowatts. I calculate this to be about 64 maximum amps. So, I'll use a dual pole GE 100 amp breaker in my box. The wire run will be about 15 feet through conduit. I'm getting conflicting reports on...

View more questions Search