Ask Experts Questions for FREE Help !
Ask
    vlhan57's Avatar
    vlhan57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2013, 11:13 AM
    Plaster does not go into wire mesh with trowel, is there a bag that can be used?
    Doing a small area on side of door. When guy put door in he chipped all the plaster and it was in hunks. I wanted to put fresh plaster in there, but when trying to do this with a trowel, it just kept falling off onto the floor. This area is only about an inch wide. I wondered if they made some kind of bag , kind of like a frosting bag they use for decorating cakes etc. to put the plaster in and then squeeze it into the wire mesh?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 22, 2013, 11:15 AM
    Look in the drywall dept at HD, they have some there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Best way to cut corner wire plaster ceiling [ 0 Answers ]

Wondering the best tool to use to cut old cement board with wire corners and plaster. Trying to save the ceiling while removing the full wall.

Patio, use fiber, some fiber mesh & wire, one fiber mesh & re-bar.Just fiber mesh OK? [ 2 Answers ]

Stamped concrete.

Any way to remove old wire that is stapled to stud without removing plaster/lath? [ 5 Answers ]

Any way to remove old wiring from wall that is stapled without removing plaster/lath?

Installing new Tiles on old cement and wire mesh walls [ 3 Answers ]

Have been caught up in the spiraling adventure of "lets change the toilet". Well needless to say that was what lead to redoing the whole bathroom. (Floor was wrotten.) I am in the process of taking down the floor to ceiling tiles in the tub as we are replacing them also. (50 yrs old). In...

Running new wire behind plaster walls [ 4 Answers ]

If I run new wiring behind my plaster walls will there be any code issues because I am unable to tack it to a stud behind the plaster? I am trying to do this without destroying the walls.

View more questions Search