 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Glacier bay 1 handle pull-down sprayer faucet repair
I have a glacier bay faucet - it is a kitchen sink faucet, with a sprayer that is built into the faucet - one handle. It is leaking up in the neck, but I can't even figure out how to pull the thing apart to get to whatever is leaking. There is a black plastic piece on the bottom, that is attached and prevents me from seeing inside.
When I turn off either hot or cold water, I'm guessing the sprayer still leaks (which end, I got nothing). There are four hoses coming out of the bottom of the faucet (well, really only three) - 1) hot, 2) cold, 3) black end of sprayer and gray plastic other end of sprayer. |
||||
Check out some similar questions!
How do I reattach the single handle control faucet with pull out sprayer?
No cold water on glacierbay faucet but the hot is working. Hot and cold water mixter three handle faucet. One handle is on and off ,one tub or shower and one mixing the hot and cold water. I do not have the model number.
I've taken it apart and there are not gaskets, washers, etc. When the handle is in the off/closed position water still leaks from the head.
Looking for a Glacier Bay Model 8184 Faucet Handle part
Trying to install a glacier bay faucet with sprayer and the connector is too short because we had to put extenders between base cabinet and countertop, therefore leaving the hose connector too short to fasten underneath sink. Tried Home Depot to see if there was a longer piece for sprayer to go...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
