 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The door lock message comes on twice then the error code sud comes up
The door locks and then unlocks and then it locks again and the water starts to fill, and then SUD error message displays, followed by error code F35. We went through the diagnostic run through and it only goes as far as "C 00" and then SUD error displays again...
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Our Whirlpool duet washer sometimes shows error code SUD and sometimes F-35. We cleaned out the drain at the bottom front of the washer, that helped for a while. The problem is intermittent. Sometimes it actually works fine, sometimes it gives the code F-35, 3 -5 times, then works. We took the top...
We have a Whirlpool Duet Washer with Error Code SUD, and sometimes F35. We cleaned out the drain tray at the bottom front and removed money a screw etc. That worked for a while. The strange thing is that the problem in intermittent. Sometimes the washer works, sometimes we get the error codes....
Model # 110 45976 400 After replacing the door lock F DL error code, it still gives the same code and won't start? Original problem sometimes door would not lock then it would, this time it started then stopped in middle of cycle with water left in tub and same code.
I started washing my clothes and after 20 minutes, washer stopped and is showing "Sud" in the place where I usually see remaining time. Can any one help?
York diamond 90 furnace in lock down error code 1? Blower on no heat
View more questions Search
|
