Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Service entrance conduit from meter box through the wall: Rigid or PVC
[ 4 Answers ]
I am putting a meter box on the outside of an 8" thick concrete wall. Last time I did this, years ago, I used lock nuts and plastic bushings on the ends of a short piece of rigid 1 1/2" conduit to go through the wall. After I am through the wall with the cable, I understand I don't need the...
Rigid conduit above ground application
[ 4 Answers ]
Does the NEC require the use of pipe dope or Teflon tape on the threads of rigid conduit?
What is the distance between supports for 88mm rigid conduit?
[ 1 Answers ]
What is the distance between supports for 88mm rigid conduit?
Bending rigid 1-1/4" electrical conduit
[ 1 Answers ]
Where in the greater San Jose, CA can I get an 1-1/4" electrical rigid conduit bent to specifications?
Minimum rigid conduit size
[ 2 Answers ]
What is the minimum conduit size for 3 -#2 copper wires to a service panel? View more questions Search
|