Ask Experts Questions for FREE Help !
Ask
    SearcyMe's Avatar
    SearcyMe Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2013, 09:49 AM
    Hunter Digital Thermostat filter light flashing
    Why does the change filter light continue to flash after installing a new filter?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Sep 5, 2013, 06:11 PM
    The thermostat has no idea you've changed the filter. That reminder light comes on based solely on time. In the owners manual or maybe inside the thermostat cover, it should tell you how to reset the filter reminder.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Thermostat model 44110 filter light blinking [ 3 Answers ]

Where do I find the filter

I have a hunter digital furnace thermostat. [ 2 Answers ]

When I set the temp to say 68 degrees the furnace will come on after about 25 min. the temp will show about 10 degrees cooler than what it was. Why is this. When I set the temp to shut furnace off , after 20 min it will be about 10 degrees hotter. This is a new thermostat.

Flashing 3 on Hunter thermostat [ 0 Answers ]

What does a flashing 3 mean on a Hunter Thermostat?

Hunter thermostat flashing 3 and furnace not turning on. [ 0 Answers ]

Replacing another digital thermostat with a Hunter [ 6 Answers ]

All right I read a lot of posts with how unreliable the Hunter (model 44110) is, but, I already got this one going at the same time I am doing a Honeywell. (I just asked asked that question separately.) Ok, once again, I have only two wires (black and white) and there are three possibilites for...

View more questions Search