 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing PVC shower stalls
We have an existing one piece shower stall in the master ensuite. While repainting, noticed at the top of the stall a 1/2" opening between the wall & the stall. Is trhere a reason for this? Or was it never finished with caulking?
Should this opening be caulked? Thanks, Robert. |
||||
Check out some similar questions!
I am remodeling a previously tiled shower and replacing with a prefab composite shower floor. The existing drain appears to be cemented into the slab. Will I have to break the slab and remove the existing drain or is there a "magic" adapter that I can use to extend the PVC in order to connect it...
Hi, I have a MAXX fiberglass shower stall that has always leaked. I've recaulked three times, once by the installer and twice myself. The only way I've stopped the leak was to tape the seams with duct tape so I know it can be made water tight. Do you have any suggestions as to how to make the...
Has anyone installed a sterling 60" seated shower receptor with wall surrounds on a concrete slab. The new unit did not come with a shower drain. there is a hole in the bottom That is 3-5/16" (8.4cm) and it calls for a drilled hole in slab oor foundation of 4-1/2" (11.4cm). the old drain line...
How do I form a custom shower pan?
Hi - I was wondering if you could tell me what type of adhesive I would need to attach my PVC drain to the cast iron pipe, below the shower. I have no plumbing experience and am trying to do this myself to save some $. Thanks! :) OJ Bean
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
