 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Replacing my main contactor again due to cold solder joint caused by corrosion on the timer control. I tried bypassing the timer, because my digital thermostat (Honeywell rth 7000 series) already has one. Have the yellow from the thermostat going to one side of the coil on the contactor and the...
I need to find out where I can find the location of the adaptive defrost control board for my Maytag side by side refrigerator
Hello there, I have a Rheem furnace and is only one year old. Recently my furnace didn't come on so I had someone come out and look at it and it turns out it was the defrost board on the heat pump that was bad. I replaced the board with a new one and turned the system on and it worked on heat and...
What controls the fan on my heat pump? It's running all the time, whether the compressor is running or not, and I can't tell from the diagram on the back of the shroud what actually tells the fan to shut off when temp is reached and the thermostat shuts down the compressor.
Last winter the heat wasn’t keeping up with the set temp, the outside fan came on, but the compressor would not start, you could hear it trying to start but it wouldn’t come on. The tech said the compressor was short cycling, and it was now "locked up", they put in a new compressor (part was cov’d...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
