Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Why is the standard water pressure pump cut off switch used a 30/50 psi?
[ 3 Answers ]
I have often wondered why the pressure switch used on rural pumps is always rated at 30/50 psi. I have found that water pressure to be a bit lacking at that. I always installed 40/60 switches and found that extra 10 psi makes a lot of difference . Thanks
Water pressure from well into house
[ 4 Answers ]
We have just bought a house that has a Diaphragm well tank Challenger series and the water pressure in the house is very minimal. We have replaced pressure gage and that didn't fix the problem. We have also made sure the cut-off valve opens and closes properly. There are no leaks in the pipes....
Hello, I have NO hot water pressure in my shower
[ 2 Answers ]
I have No hot water, pressure when I turn on my shower , the cold water turns on no problem. I think it is the shower valve
No hot water coming out of hot side of faucets but water coming out of cold
[ 1 Answers ]
Had breaker to elecric heater turned off for couple months after turning back on the cold water works but there is no water at all coming out of hot side. There;s only one valve and its turned on what is the problem?
No hot water coming from kitchen mixer tap but there is cold water coming out.
[ 3 Answers ]
It is -13c outside not sure if that has anything to do with my problem. This morning I turned on the hot water tap and nothing. Turned on the cold got some. It's a reasonably new mixer tap. The central heating has been on all night, the shower is working and so too is the downstairs WC hot water... View more questions Search
|