Ask Experts Questions for FREE Help !
Ask
    Bealimogianni's Avatar
    Bealimogianni Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2013, 03:36 PM
    Whirlpool washer won't high spin
    We recently noticed that our washer won't high spin. It makes a noise like its trying to spin but nothing happens and it smells hot. It fills, drains and agitates fine. Today we replaced the whole clutch assembly and checked the coupler (coupler was fine). It worked for a couple of loads and then stopped doing the final high spin. Our model is the Whirlpool LSB6300LW2 Top loader. I have also noticed that clothes are constantly getting stuck under the agitator and I have to check to make sure that a sock hasn't been lodged up under there. I am wondering if if there is another quick-fix resolution that I can try before calling someone out to take a look at it or any tests I can run to narrow down the potential problem. Thank you! Britt
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 15, 2013, 11:01 PM
    Look at these: https://dl.dropboxusercontent.com/u/...%20Washers.zip
    https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    They should help you diagnose it. You need a meter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why won't my whirlpool washer agitate or spin [ 2 Answers ]

My machine will fill with water fine and then it just sits there with the water and soap will not agitate or spin.

My whirlpool washer works fine, just does not spin on the final spin [ 0 Answers ]

By the final spin, it will not spin, though it makes noise like it is, but the clothes are still very wet. Sometimes it does spin though. Seems like it's moody.

Whirlpool washer, agitator works, but during the spin cycle it doesn't spin [ 1 Answers ]

I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....

Whirlpool washer spins slowly on high spin setting [ 1 Answers ]

What controls the spin speed of the whirlpool washer? I have one which is less than 5 years old and it spins faster on slow spin cycle than on the high spin cycle. Please give me any ideas you might have as to why this occurs. Thanks Gary

View more questions Search