Ask Experts Questions for FREE Help !
Ask
    bogyjohn1's Avatar
    bogyjohn1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2013, 12:43 PM
    Oil ports for B&S 14.5 hp engine
    I have a 14.5 hp. B&S lawn mower. I don't think the oil is circulating because it is always clean. How do I clean the oil ports?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Aug 14, 2013, 12:44 PM
    It wouldn't be running very long if it wasn't circulating.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Oil leak in a 26 hp Briggs & Stratton engine [ 2 Answers ]

Good Morning: My Skag mower runs off a 26 hp Briggs. There is a slow oil leak somewhere (about 1/4 quart in 4 hours or running. However, this is either the result of or cause for an exciting fire. Its hard to determine where the leak occurs; its somewhere close to the bottom of the engine. The...

2006 briggs & stratton 18.5 engine can only move engine 1/4 turn & it stops [ 4 Answers ]

2006 craftsman briggs & stratton 18.5 engine ran fine , I shut off for 10 min coould not get it started again. Starter is good, oil level is good. Took cover off top of engine can only move engine 1/4 turn & it stops like it is jamed on something. The machine has very few hours of use & was always...

12.5hp Briggs & Stratton Engine leaking oil [ 4 Answers ]

I have a ~16 year old Murray tractor with 12.5 hp B&S engine. When I tried to start it this season, it started rough, smoked badly and died. Found oil leaking near muffler and on the floor. Pulled the spark plug and it also had oil on it. Battery still cranking starter, but engine won't start. ...

What engine oil for a B&S Vanguard V-twin OHV 16hp [ 2 Answers ]

What engine oil for a B&S Vanguard V-twin OHV 16hp >Moved from Forum Help<

Gasoline in oil of B&S 14.5 HP OHV Engine [ 1 Answers ]

I am working on another B&S 14.5HP OHV engine and I went to drain the oil and gasoline had gotten into the engine block. Any suggestions on how this happened and what can be done to fix the problem. Thanks.

View more questions Search