Ask Experts Questions for FREE Help !
Ask
    epstephanie's Avatar
    epstephanie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2013, 11:04 AM
    How do I replace the front sealing strip on my Bosch Nexxt 500 series electric dryer.
    I replaced the belt and still have a squealing noise when I turn the drum with the back panel off and the drum push into the front or am running a load of clothes. When I pull the drum a bit out of the front, the noise stops... am I going in the right direction?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 13, 2013, 08:33 AM
    It sounds like you either put it together wrong or did not clean it and lubricate it with white lithium grease. All bearings and support rollers must be lubricated with white lithium grease.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you replace the motor in a kenmore 80 series dryer? [ 1 Answers ]

Model 110.66814694

Kenmore stackable 41797862792. How do I remove the front dryer panel so I can replace [ 0 Answers ]

I need to replace the felt which the drum rides upon. I have removed the top screws and separated both sides of the front panel from the side of the machine, but I am not able to remove the front panel. It is still attached at the bottom to the control panel. How do I remove the front panel from...

Kenmore 500 series dryer [ 1 Answers ]

I have an old kenmore 500 series dryer, where would the lint filter be?

Electric front load whirlpool dryer belt [ 1 Answers ]

Our belt broke on our electric front load Whirlpool dryer. We pulled it out. How can we change it?

View more questions Search