Ask Experts Questions for FREE Help !
Ask
    leggie3's Avatar
    leggie3 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2013, 09:30 AM
    Manuals for lawnflite 603 mower-tractor
    I need to know how many belts there are and there layout and any information on how to change them.
    Thank you
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 6, 2013, 10:16 PM
    Hi,
    If it one made in the past twenty years, it probably has three. Two on the drive system for the transmatic and one for the deck. I will need the whole model number to answer further(under the seat and has eleven number, letters or hyphens.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you start a Lawnflite 603 mower [ 3 Answers ]

Hi I have a client that has inheritted a Lawnflite 603 mower but has no manual. We can get the engine to spin but can't get it to start. Has anybosy any ideas? Thanks

Weed Eater Mower Tractor [ 4 Answers ]

I have an old weed eater tractor. The model is 733-848. The carburetor was acting clogged up so I took it apart. I cleaned it all out and put it back together but it is still not working. It will fire up if you pour gas right down into the carburetor so I know its got to be a fuel problem...

Murray riding mower manuals model #38608x12a [ 1 Answers ]

Need replacement blades for my Murray riding mower w/ 38 inch cut... model #38608x12a and also a manual

Yard king lawn mower manuals [ 1 Answers ]

I have a Yard King 39 inch riding lawn mower. The model number below the seat reads C3913000 with a Code number beside it of 2052. The serial number is S001010322644. Does anyone know where I can find a manual for this mower?

Tractor lawn mower [ 2 Answers ]

Hi I have a Wizard lawn mower with a Briggs & Stratton engine that was ran with low oil I don't know much about engines but when I stripped it the piston arm has sheared at the end I can't see any other damage so my problem is I need to replace the piston but I can't see any no on the piston all I...

View more questions Search