 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
mixmaster model 10 runs full speed with new cap and resistor
Bought a model 10 mixmaster worked fine all speeds/suddenly while testing it took off full speed fully bypassing sped control. I have just replaced the power resistor with a part of same value and the same with the cap. Results? Bad Still runs 117volts straight to motor - no speed conrol. I double checked the new part values and they remain as new. What is causing this total bypass of the speed control?
Thanks for your help. DR |
||||
Check out some similar questions!
I wonder what's wrong? It's a wonderful antique. Looks not too different to this: Sunbeam Mixmaster Stand Mixer : Target It has a variable speed control. All of a sudden it no longer responds to the speed dial but runs top speed constantly. What is wrong and how might I go about fixing...
Hi, I am trying to repair a Casablanca Four Seasons Ceiling Fan Model 4444 (Early 1980's Vintage). I am looking for the value of the small single resistor (R1) on the fan speed board, mine is blown, color code unreadable, and can't be measured on an ohm meter. If anyone has one on the bench...
A/c fan runs at half speed causing the a/c to shut down
I just bought a car and when checking the fluids took off the radiator cap it was full of oil and no coolant I need to know if a new radiator and flush will save the motor?
This is not the blower in house ac but the one in the car.. it is running but does not come on full speed is there something other than the motor that could be causing this?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
