Ask Experts Questions for FREE Help !
Ask
    Flyfisherpro's Avatar
    Flyfisherpro Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2007, 03:44 PM
    Diverter valves and body jets
    I have been trying to find a schematic for installing 2-way and 3-way diverter valves that will control 4 jets, shower head and separate hand held shower. Not sure where the 2-way and 3-way install. Meaning, what controls what.
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
    		  
    #2

    Mar 25, 2007, 05:02 PM
    Are you missing the paperwork that came with the diverter?

    What brand is it?
    Flyfisherpro's Avatar
    Flyfisherpro Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 25, 2007, 09:40 PM
    It's American Standard, I have the paperwork and 3 yrs ago when I bought everything, I sort of knew what I was doing. Now, I'm not sure. I have a 2-way diverter and a 3-way diverter. I was to run, 4 jets, one handheld sprayer, 2 shower heads. I cannot find my original drawing. So can the 3-way run a shower head and all four jets? Then the 2-way runs another head and the handheld?
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
    		  
    #4

    Mar 26, 2007, 04:35 PM
    Sure, just tee the extra outlet on the three-way diverter into one of the other outlets on the same diverter -- This will effectively cancel out the function of that port on the diverter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bubbles out from jets [ 2 Answers ]

My 2 pool jets are releasing small bubbles, seeking advice on where the air may be getting in

Shower diverter valves [ 1 Answers ]

I am building a new shower with both 3/4 and 1/2" supplies on opposite sides of the space. I intend to have multiple body sprays and a shower head on the 3/4 side, and one spray and head on the 1/2 side. I am in need of info about what types of valve(s) I can use to simplify and reduce cost. Are...

Diverter valves for shower spas [ 1 Answers ]

I am building a new shower. I have 2 water supplies, h and c, on each side of the shower area. The 3/4" pair will serve one shower head and 3 body sprays, and the opposite side 1/2" set will supply one body spray and one shower head.(as well as a bar sink on the opp. Side of the wall). I have...

Jets [ 2 Answers ]

Cancellation of this question.

View more questions Search