Ask Experts Questions for FREE Help !
Ask
    KAS3's Avatar
    KAS3 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 11, 2013, 05:37 PM
    Smc ceiling fan repair
    My smc ceiling fan wobbles badly at high speed. Was it installed properly?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jul 11, 2013, 06:14 PM
    Was it balanced after installation? All fans have balance kits with them when sold
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Jul 11, 2013, 06:48 PM
    BTW, SMC fans usually get low ratings because of noise and performance. They are commonly found a Wal -Mart, K Mart, Target etc.
    AnswerMan5000's Avatar
    AnswerMan5000 Posts: 186, Reputation: 3
    Junior Member
     
    #4

    Jul 15, 2013, 11:45 AM
    Hello,

    I found a relevant website article for you about balancing your ceiling fan - this should help with wobbling and other unbalanced fan issues.

    This talks about different steps you can take to balance your fan properly. With a little bit of guidance you can likely resolve this problem.

    Ma0641 is right but maybe you can still balance the fan properly without having to return it, if you are set on using that fan.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Jul 15, 2013, 12:26 PM
    All cheap fans wobble. Some more than others. Some can be toned down, some no.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Are smc ceiling fan parts available [ 1 Answers ]

I have an smc ceiling fan model A 52. Are parts still available? I need a couple of the arms that the blades attach to in antique brass color.

Smc ceiling fan parts [ 1 Answers ]

I have a SMC ceiling fan mod#DPA42LO. Where can I find a replacemnt glass for the light? Its mushroom shaped and measures 7" at base, about 81/2" overall.

SMC ceiling fan [ 1 Answers ]

I live on the Gold Coast Australia and have some SMC model KB52 ceiling fans - the fans are in good order, but the blades need replacing - any ideas where I might get them from?

SMC ceiling fan capacitor [ 3 Answers ]

I need to know where to obtain a replacement three lead 2.5+4uF capacitor for a model X42M-ML SMC ceiling fan in South Africa or on the internet.

SMC Ceiling Fan [ 4 Answers ]

I have a ceiling fan. The logo on the pull cord of the switch says SMC I need to replace the 2-wire switch that controls the light. Where do I find the part? John


View more questions Search